FR Kevlar aramid non-woven 1414 fabric

Key Characteristics

Fireproof and flame-retardant, only carbonized, without molten droplets; It will automatically extinguish within 2 seconds after leaving the open flame, and its flame retardant performance meets the EU EN479 fire protection standard

Thermal performance, degrades at 482 ° C in air, decomposes at 538 ° C in nitrogen, does not undergo embrittlement in an environment of -196 ° C, and can be used for a long time at high temperatures of 300 ° C. 

Wear resistance, cutting resistance, and wear resistance coefficient are better than mixed grade 5 fiberglass 100000 times

Chemical resistance, acid and alkali resistance, salt solution resistance, mixed chemical resistance, organic solvent resistance UV resistance performance: When KEVLAR is exposed to ultraviolet or artificial light sources for a long time, it will change from yellow to brown but has no effect on the product's performance. It can be used outdoors for 50 years.

Mechanical properties: fracture elongation rate<3.5%, strength is 5 times that of steel wire under the same weight,>25g/D

Applications

Personal Protective Equipment (PPE): Firefighting suits, welding blankets, cut-resistant gloves, sleeves, and heat-resistant apparel for industrial or military use, thanks to its inherent flame resistance and high tensile strength.

Industrial & Automotive: Heat shields, gaskets, seals, protective barriers, and components needing high-temperature stability and abrasion resistance.

Aerospace & Defense: Structural reinforcement in aircraft, bulletproof vests, and tactical gear due to its lightweight strength and impact energy absorption.

Construction & Reinforcement: Used in composites, technical textiles, and architectural applications for enhanced durability and fireproofing.

Specialty Uses: Air slide belts (for conveying powders), cable reinforcement, and composite materials where high performance is critical.